Corrugated Box Design

Structural corrugated box engineering, FEFCO CAD dielines, 3-ply to 7-ply board specifications, and monsoon compression checks for manufacturers across India.

Structural Engineering

Engineered around your product, not a stock catalogue

Off-the-shelf cartons either waste freight volume or fail when warehouse stacks hit peak humidity. We engineer custom corrugated boxes — from FEFCO 0201 RSC master cartons to die-cut FEFCO 0427 self-locking mailers and slotted divider kits — with exact board specs your converter can run immediately.

FEFCO Structural CAD & Dielines

Parametric structural drawings for RSC (0201), FOL (0203), die-cut mailers (0421 / 0427), telescopic cartons (0301), and internal kraft partitions with full cutting and creasing allowances matched to flute caliper.

Board Grade & Compression Sizing

We specify corrugated board by Edge Crush Test (ECT), bursting factor (BF), GSM buildup, and flute profile (E, B, C, BC double-wall, or 7-ply triple-wall) sized for actual column stacking and Indian monsoon humidity.

Right-Sizing & Pallet Fit

Carton outer dimensions are tuned directly to 1200×1000 mm and Euro 1200×800 mm pallets, courier volumetric weight brackets, and EU PPWR 50% empty-space thresholds before cutting dies are ordered.

Prototyping & Supplier Briefs

Physical plotter samples for pack-line fit checks, a clear converter specification sheet, and compression or ISTA/ASTM transit test plans so production batches match the signed engineering drawing.

Four Lenses

How we evaluate every corrugated box design

LensWhat we engineer & verify
MaterialKraft vs recycled testliner combinations, flute geometry (E, B, C, BC, EB), Cobb moisture resistance, glue-flap joint type (stitched or glued), and realistic board caliper allowances.
Logistics / TransitMcKee BCT stacking margins at 50–85% RH, column vs interlocked pallet patterns on 1200×1000 mm decks, courier volumetric divisor checks, and pack-line erection speed.
RegulationEU PPWR empty-space ratio checks (≤50% target where applicable), IS / ISO / TAPPI T804 compression test alignment, and print/handling symbol layouts.
CircularityMono-material fibre structures eliminating plastic void fill, right-sized flat blank area to minimise trim waste, and kerbside-recyclable kraft specifications (FSC chain-of-custody where required).

Actual board savings and compression performance depend on your product geometry, current grade, and distribution route (typical, confirm with physical prototypes and lab testing).

Corrugated Box Design FAQ

What file formats do I receive for custom corrugated box designs?

You receive supplier-ready structural CAD dielines (DXF and PDF with separate cut and crease layers), 3D assembly views, corrugated board and flute specifications, pallet loading sheets, and a converter brief with no ongoing royalties.

Should I specify corrugated boxes by BF (Bursting Factor) or ECT (Edge Crush Test)?

BF measures puncture resistance and paper strength, while ECT directly governs vertical stacking strength (BCT). For palletised shipments and humid Indian warehouses, specifying both paper GSM/BF and target ECT prevents monsoon stack collapse. Read our monsoon carton collapse guide for details.

Can BOXXMEN redesign an existing 5-ply box to cut material cost safely?

Yes. We audit your current carton dimensions, stacking loads, and flute profile to remove excess blank area or over-specified board grades while preserving the required compression safety factor (confirm final grade via physical BCT or transit testing).

Need a custom corrugated box drawing?

Send your product dimensions, weight, and shipping route for a fixed-fee engineering proposal within 1 working day.