ISPM-15 Export Crating & Heavy Skids
Structural plywood crates, 4-way pine machinery skids, bolted load cradles, and sea-freight VCI moisture protection engineered for industrial exports from India.
Heavy Industrial Packaging
Built for forklifts, crane slings, and ocean containers
Machinery, electrical panels, castings, and precision assemblies fail in export transit when base skids flex, centre-of-gravity marks are guessed, or salt air condenses inside sealed crates. We engineer complete timber and plywood crate assemblies with load-path drawings your fabricator can build to spec.
4-Way Pine Skids & Bolted Cradles
Runner sizing, deck board spacing, hardwood hold-down chocks, tie-down bolt locations, and neoprene vibration isolation mounts calculated around your equipment footprint and forklift fork spacing.
Birch & Commercial Plywood Enclosures
Sheathed plywood crates, battened heavy-duty panels, steel corner clip systems, and knock-down flat-pack designs engineered for container stacking and repeatable line packing.
VCI Corrosion & Desiccant Engineering
Barrier foil shrouds, VCI film selection for ferrous and multi-metal surfaces, and DIN 55473 desiccant unit calculations to prevent container rain rust on 30-to-60-day ocean voyages.
Container Stuffing & Handling Plans
Crate outer footprints matched to 20 ft and 40 ft ISO sea containers and air cargo ULD limits, complete with sling points, tilt/shock indicator callouts, and stencilled centre-of-gravity markings.
Four Lenses
Export crate engineering across four lenses
| Lens | Engineering focus |
|---|---|
| Material | Heat-treated pinewood runners, moisture-checked plywood sheathing (typically 9–18 mm depending on span), steel strapping or clip hardware, and non-corrosive blocking timber. |
| Logistics / Transit | Forklift and overhead crane lift points, container cube efficiency, shock and vibration isolation, and safe top-load stacking clearances in consolidated LCL/FCL freight. |
| Regulation | Designed for ISPM-15 phytosanitary heat-treatment compliance (HT stamp applied by licensed treatment facilities) and international handling pictograms (ISO 780). |
| Circularity | Timber volume optimisation, clip-fastened reusable or easy-to-disassemble crate panels, and laminated kraft honeycomb blocking alternatives where load permits. |
BOXXMEN provides structural engineering drawings and specifications. Official ISPM-15 heat-treatment certification and IPPC stamping must be performed by an accredited timber treatment provider.
Related Calculators & Examples
Size desiccants and container loads before quoting
- DIN 55473 Desiccant & Container StuffingEstimate clay desiccant units for sea freight and check 20ft/40ft container fit.Open tools →
- Export Crate Assembly ExamplesInspect our birch plywood & 4-way pine skid crate and kraft honeycomb heavy buffers.View work →
- Heavy-Duty Corrugated BoxesEvaluate 7-ply triple-wall corrugated alternatives for lighter export shipments.Explore →
Export Crating FAQ
What is required for ISPM-15 export crate compliance?
Solid wood packaging thicker than 6 mm exported internationally must be debarked and heat-treated (or approved equivalent) by an accredited facility carrying the IPPC HT mark. Manufactured plywood panels are exempt from solid-wood ISPM-15 treatment, though solid pine battens and skid runners still require HT treatment.
How do you stop rust and condensation inside sea-freight export crates?
We combine an inner VCI film or heat-sealed aluminium barrier foil shroud with desiccant quantities sized via DIN 55473 based on barrier area, enclosed timber weight, transit duration, and humidity exposure.
What drawings do we get for our crate fabricator?
You receive dimensioned 2D fabrication drawings (PDF/DXF), cut lists and bill of materials for runners, battens, plywood panels, fasteners, blocking chocks, and clear assembly and packing instructions.
Shipping heavy machinery or export assemblies?
Share equipment weight, base mounting holes, and destination port for a practical crating proposal.